Skip to content

Cleaning the interior: instructions for cockpit, seats and carpet

Clean your car interior step by step: vacuum, care for plastic, fabric and leather, dry properly and ventilate.

Key points at a glance

Overview: Cleaning the interior: caring for cockpit, leather and upholstery

Verified test results

  • We currently have no verified test results from independent publishers on this topic. As soon as published tests exist, we will add them here with their source.

The order in which to clean the interior

A fixed order prevents dirt from above falling onto surfaces that have already been cleaned. This sequence has proven effective:

Step Area Goal
1 Remove rubbish and loose items create clear work surfaces
2 Vacuum dry pick up dust, sand and crumbs
3 Clean cockpit and plastic remove fingerprints and dust
4 Treat fabric and upholstered seats reduce stains and odours
5 Clean and care for leather loosen dirt, protect the material
6 Clean carpet and floor mats loosen deeply embedded sand
7 Dry and ventilate remove moisture

Preparation

First remove rubbish, bottles, crumbs and loose items from the interior. This makes vacuuming easier and lets you reach all areas. Park the car in the shade if possible and open doors or windows. Have microfibre cloths, a soft brush, a vacuum cleaner with crevice nozzle and the appropriate cleaners ready. Read the manufacturer's instructions before using a product for the first time.

Vacuuming

Vacuum the interior dry before using wet cleaners. Start with floor mats and carpet, then seats, crevices and the boot. A crevice nozzle helps on rails, between seat and centre console and at the edges of floor mats. A soft brush attachment loosens sand from fabric. Work slowly so that the vacuum picks up the dirt rather than just spreading it. Change the nozzle if necessary instead of forcing it into narrow gaps.

Cockpit and plastic

For the cockpit, start at the top of the dashboard and work downwards. Remove dust first dry with a soft cloth or brush. Apply cleaner to a cloth, not directly to the surface. Wipe damp and then dry afterwards. For the dashboard, the page Cockpit care provides material notes on hard plastic, soft-touch and piano black. Displays and controls get a separate, only slightly damp cloth.

Fabric and upholstered seats

Vacuum fabric seats thoroughly first. Treat stains with a cleaner suitable for upholstery according to the manufacturer's instructions. Apply thinly, work from the outside in and dab rather than rub. Too much water is unfavourable for upholstery because it remains in the padding for a long time. After cleaning, absorb excess moisture with a dry cloth and let the area dry well. For stubborn stains, a specialist workshop is more sensible than an aggressive household cleaner.

Leather

Leather needs different care from fabric or plastic. Remove dust first dry and then clean with a mild product intended for leather. Do not rub hard; work with little pressure and a soft cloth. Then dry afterwards and care for the leather when it is dry. For leather seats, you can find further notes under Leather care. Test every product first in a concealed place.

Carpet and floor mats

Take out the floor mats and beat them out. Vacuum carpet and mats thoroughly, including at the edges and under the seats. For stains, work with a suitable carpet cleaner according to the manufacturer's instructions. Do not work too wet: moisture in the carpet can remain for a long time and encourage odours. After cleaning, dry well and ventilate the interior. Damp floor mats should be completely dry before you put them back.

Drying and ventilation

Drying is a separate work step. Wipe smooth surfaces afterwards with a dry microfibre cloth. Ventilate the interior by opening doors or windows. For damp upholstery, it helps to let the air conditioning or ventilation run for a while. Avoid leaving damp cloths or wet floor mats in the closed car. Also dry crevices, seams and transitions where water can collect.

Typical mistakes

Safety and storage

Work with the door or window open. Wear gloves if the manufacturer's instructions specify this, and avoid eye contact. Keep cleaners out of the reach of children and pets. Store them tightly closed, cool and not in direct sunlight. Dispose of used cloths and packaging according to local rules. If you are unsure about ingredients or first aid, the manufacturer's safety data sheet helps.

Suitable accessories

Useful items are a vacuum cleaner with crevice nozzle and brush attachment, several microfibre cloths, a soft brush for crevices and separate cleaners for plastic, fabric and leather. A dry cloth for wiping afterwards is part of the kit. For upholstery, a cloth that absorbs moisture well is suitable. Avoid hard brushes, scouring sponges and aggressive household cleaners.

Frequently asked questions

How often should I clean the interior?

That depends on use, passengers, pets and season. Regular dry cleaning and occasional vacuuming prevent dirt from becoming ingrained. A more thorough cleaning is sensible when upholstery becomes stained or odours remain.

Should I vacuum or wipe first?

Vacuum first. Dry dust and sand are easier to pick up as long as they have not become wet. Then follow wet cleaning steps and finally drying.

Which product is suitable for upholstery?

Use a product that the manufacturer states is intended for upholstery or textiles in cars. Apply it thinly, dab rather than rub and absorb excess moisture. For delicate upholstery, testing in a concealed place is sensible.

May I treat leather with plastic cleaner?

Leather and plastic are different materials. Leather has its own cleaners and care products. A plastic cleaner can dry out or discolour leather. Follow the manufacturer's instructions and test in an inconspicuous place.

How do I avoid moisture in the interior?

Work with little water, absorb excess moisture and ventilate after cleaning. Floor mats and cloths should not remain wet in the closed car. Also dry crevices and seams.

What should I do about heavy stains?

For heavy or unknown stains, a specialist workshop is often the safer choice. Aggressive stain removers can damage materials. If you work yourself, first test in a concealed place and follow the manufacturer's instructions.

Conclusion

Cleaning the interior succeeds with a clear order: first remove rubbish and dust, then vacuum, then clean the materials individually and finally dry well. Plastic, fabric, leather and carpet need different products and different amounts of moisture. Anyone who uses little water, clean cloths and follows the manufacturer's instructions protects materials and avoids odours.

More guides